​Four sets of 8 x 10 inch laminated number cards with easy pull tabs that insert from the bottom for quick insertion and removal

1 Adjustable height stand with adjustable number card storage

Close up view

1 Number cardholder

Paginator: Box Contents

Close up view

C

B

Paginator: Assembly Instructions

D

1 Base

Close up view

1 Instruction sheet

1 Brochure

A

1. For easy handling, remove the laminated numbers from the number cardholder.

2. Remove the three wing nuts from the bottom of the stand.

3. Connect the base with the stand (as shown in picture A) by lining up the three holes in the base

    with the three screws on the bottom of the stand. Secure with three wing nuts (as shown in picture B).

​4. After securing the base, stand the unit upright (as shown in picture C).

5. Adjust the stand to a comfortable height by using the two knobs located behind the number
    cardholder so the two top holes for the number cardholder are exposed.

6. Attach the number cardholder by removing the wing nuts and aligning the two screws with the holes
    in the stand. Secure with the two wing nuts (as shown in picture D) and the unit is ready to be used. 

    ​​​*The number cardholder can be used independently by securing it to a wall if so desired.